A bow sight is more like a circular housing with fiber optic pins indicating various distances. You can easily aim at different ranges without issue using a bow sight. You only need to adjust the pin on your target at a desired range. With this little adjustment of pins, you can take a clear and accurate shot of your target. Learning how to mount a sight on a recurve bow is easy, and you can do it at home. Bow sights may have multiple mounting holes, which can be configured to adjust the sight’s position on the bow riser either vertically or horizontally.
These options are offered to accommodate the different sizes and configurations of bows across various manufacturers and may require adjustments for optimal accuracy. To further improve accuracy, it is recommended to position the pin further away from the shooting eye. It creates additional eye relief, similar to aiming down the long barrel of a rifle compared to a short-barrel handgun.
How To Mount A Sight On A Recurve Bow
Mounting a sight on a recurve bow can greatly improve accuracy, especially for target shooting. Here are a few steps to mount a sight on a recurve bow.
Step1: Choosing the Right Sight
Choosing the right sight for your recurve bow can greatly affect your accuracy and shooting experience. There are numerous sights available such as a fixed pin or adjustable pin. Fixed pin sights have a set number of pins adjusted for specific distances, while adjustable pin sights can be adjusted on the fly for different distances. Moreover, the size of the pins also affects your accuracy. Usually, smaller pins are perfect for shooting longer distances, and larger pins are better for shooting at shorter distances. Keeping your shooting distances in mind, choose a sight with pins that suit your needs.
The number of pins on sight can also affect your accuracy. A sight with fewer pins is easier and less distracting, while a sight with more pins allows for greater accuracy at longer distances. Another key thing is the material of the sight can affect its durability and weight. Sights made of aluminum or carbon fiber are lightweight and durable, while sights made of plastic or other materials may need to be more durable and lighter. Ultimately, the right sight for your recurve bow will depend on your needs and shooting style.
Step2: Determine the Mounting Location
Determining the mounting location for your sight is an important step when mounting a sight on a recurve bow. The mounting location can vary depending on your shooting style. If you shoot with a split-finger technique, you may want to mount the sight closer to the riser to avoid interference with your fingers. If you shoot with a three-finger under technique, you may want to mount the sight further away from the riser to allow for a better view of the sight picture. The length of your bow can also affect the mounting location. If you have a shorter bow, mount the sight closer to the riser to avoid interference with the limbs. If you have a longer bow, mount the sight further away from the riser to allow for a better view of the sight picture.
Furthermore, the type of arrow rest you use can also affect the mounting location. If you use a flipper-style rest, mount the sight away from the riser to avoid interference with the rest. If you use a stick-on style rest, you may want to mount the sight closer to the riser to avoid interference with the arrow. Ultimately, the mounting location will come down to personal preference. Try mounting the sight at different locations and see which works best for you.
Make sure to mark the location with a pencil to find it again easily. Once you have determined the mounting location, use a clean cloth to wipe off any dirt from the area. It will ensure a secure fit for the sight. Depending on the type of sight, it may come with mounting screws or clamps. Attach the sight to the mounting location, ensuring it is aligned properly. Finally, adjust the sight according to your needs and test it to ensure optimal accuracy.
Step3: Clean the Mounting Area
Use a clean cloth to remove any dirt from the mounting area. Dirt can prevent the sight from attaching securely to the bow and affect accuracy. Once you have removed any dirt, use rubbing alcohol to clean the mounting area. Rubbing alcohol is a good solvent that can remove any residue or oils that may be present on the surface. Apply the rubbing alcohol to a clean cloth and wipe the mounting area thoroughly. After wiping the mounting area with rubbing alcohol, allow the alcohol to evaporate completely before attaching the sight. It usually takes only a few seconds, but you can speed up the process by using a dry cloth to wipe the mounting area after cleaning it.
Once the alcohol has evaporated, inspect the mounting area for any residue or debris. If you find any, use a clean cloth to remove it. If the mounting area is still not clean, repeat the process until the surface is completely free of dirt, debris, and residue. It is important to note that some recurve bows may have coatings or finishes that can be damaged by rubbing alcohol or other solvents. Always check your bow manufacturer’s recommendations before cleaning the mounting area or any other bow part. Properly cleaning the mounting area of your recurve bow will ensure a secure and accurate attachment of the sight. It is a simple but important step that should be noticed.
Step4: Attach The Sight
Attaching the sight to your recurve bow is critical in ensuring optimal accuracy. Before attaching the sight, determine the best mounting location for your shooting style, bow length, and arrow rest. Use a pencil to mark the location on your bow. Depending on the type of sight, it may come with mounting screws or clamps. If your sight comes with screws, attach the sight to the mounting location using the appropriate screwdriver. Tighten the screws securely, but be careful not to over-tighten them. Attach them to the bow using the appropriate tool if your sight uses clamps. Hold the sight up to the mounting location and align it properly. Please ensure the sight is level and perpendicular to the bowstring.
Adjust it according to your needs once the sight is attached. Depending on the type of sight, you may need to adjust the windage, elevation, or both. Use the adjustment knobs or screws on sight to make the necessary adjustments. After adjusting the sight, please test it out to ensure optimal accuracy. Take a few shots and adjust the sight as necessary until you achieve the desired accuracy. It is important to note that different sights may require different attachment methods or adjustment techniques. Always refer to the manufacturer’s instructions for your sight to ensure proper attachment and adjustment.
Wrap-Up
Attaching the sight to your recurve bow may seem simple, but it is crucial for achieving optimal accuracy. Follow these steps carefully and take the time to make necessary adjustments to ensure the best shooting experience. If you follow the steps mentioned, you better understand how to mount a sight on a recurve bow.