How To Bare Shaft Tune Your Bow – Archery For Beginners

How To Bare Shaft Tune Your Bow

Bare shaft tuning is an essential step in bow setup. How To Bare Shaft Tune Your Bow? It can improve accuracy and performance. It entails shooting a series of arrows with no fletching or vanes attached.

To determine the effects of the bare arrow on your bow’s alignment and performance. This process will help you fine-tune your bow. So it’s shooting as accurately and consistently as possible.

The Bare Shaft Tuning Process

Once the bare shaft tuning process is complete. You’ll be able to choose which type of fletching or vanes would best suit your shooting style. This will help ensure that you get the most performance from your bow. So you can spend more time hitting targets and less time adjusting your setup.

Here are the steps to follow when doing bare shaft tuning:

  • Start by shooting a group of arrows with regular fletching or vanes attached, from a marked distance such as 20 yards (18 meters).
  • Take note of how many inches each arrow deviates from the target.
  • Remove the fletching or vanes from three arrows and re-shoot them from the same distance.
  • Compare the results of the bare shafts with those of the regular arrows, noting which ones deviate more than others.
  1. If necessary, make adjustments to your bow’s alignment to achieve a better center shot.
  • Once your bow aligns, compare the results of the bare shafts and regular arrows. Once more to ensure consistent accuracy from all arrows.
  • Finally, choose the type of fletching or vanes. It works best with your bow’s alignment and shoot another group of arrows to confirm your choice.

Shooting Session

You should perform this process before every shooting session. Ensure that your bow shoots as accurately and consistently as possible. If you’ve made any adjustments or repairs to your bow. You should also perform bare shaft tuning to verify that it’s still shooting.

Gathering Equipment and Materials

Before you start bare shaft tuning. Make sure that you have all the necessary equipment and materials. This includes a bow square for checking the nock point and arrow rest alignment.

An Allen wrench for adjusting the nocking points, some fletching glue or tape to reattach your vanes or fletches after tuning. And an arrow puller in case any arrows get stuck in the target. Having all these items on hand will make the tuning process easier and more efficient.

Understanding the Equipment

Before you start bare shaft tuning. It’s essential to understand the equipment you’ll be using.


  • The weapon used in archery. Different bows have different pull weights and lengths. Which can affect the trajectory and speed of your arrows.


  • The projectiles shot from the bow. Arrows can vary in length, weight, and material. Which can also influence how they fly.


  • This is what you aim at. It’s usually a circular object with different scoring zones.

          Bow Square

  • You use this tool to measure the bracing height of your bow and align the nocking point.

          Allen Wrench

  • You use this small hand tool to make minor adjustments to the nocking points on your bow.

          Fletching Glue or Tape

  • You use these adhesives to attach the fletching or vanes back onto your arrows once you have completed the tuning process.

          Arrow Puller

  • You use this tool to remove arrows that have become lodged in the target.

Types of arrows suitable for bare shaft tuning

          Carbon arrows

  • These are the most common type of arrows used in archery. They are lightweight and accurate and have good penetrating power.

          Aluminum arrows

  • These arrows are cheaper than carbon arrows but are heavier and less accurate. They also do not penetrate as well as carbon arrows.

          Wood arrows

  • Wood arrows offer a more authentic shooting experience. It allows you to fletch them with various types of feathers. They are less accurate and tend to break more than other types of arrows.

No matter which type of arrow you use for bare shaft tuning. It’s important to make sure that the length, weight, and spine are all matched with your bow setup.

Bare Shaft ShootingTechniques

When shooting bare shafts, it’s important to maintain proper technique and form. Here are some tips for successful bare-shaft tuning:

  1. Aim carefully and take your time when aiming. This will help you get the most accurate results possible.
  • Focus on developing a consistent anchor point and release. This is vital for accuracy and consistency.
  • Keep your follow-through consistent. This will help you maintain accuracy and consistency from shot to shot.
  • Listen for the “thwack” of the arrow hitting the target. This will help you judge whether your arrows are striking in their intended spot.
  • Visualize each shot before it is released. And use the feedback from your previous shots to help you adjust.
  • Be patient – it may take several adjustments and tweaks before you find the ideal setup for your bow.

By following these steps, you should be able to get the most out of your bare shaft tuning process.

Bare shaft tuning recurve or compound bows

Bare shaft tuning is a great way to fine-tune your recurve or compound bow setup. The process is similar for both but you should take into consideration some slight differences. When tuning each type of bow:

          Recurve Bows

  • Since recurve bows have no adjustable components. The only way to optimize the bow’s performance is by adjusting the nocking point. This will ensure that your arrows fly in a straight line and are as accurate as possible.

          Compound Bows

  • Compound bows can be fine-tuned even further due to their adjustable components. Such as draw length, draw weight, and cam timing. You can adjust all these to achieve the best performance from your bow.


Q: How often should I tune my bow with bare shafts?

A: For best results, you should tune your bow with bare shafts at least once a month. This will ensure that your bow is always shooting accurately and consistently.

Q: What if my arrows are going too high or too low?

A: If your arrows are going too high or too low, you may need to adjust the nocking point of your bow. Adjusting the bracing height can also help you. To achieve consistent accuracy from shot to shot.

Q: How do I know when my bow is properly tuned?

A: Once your bare shafts are striking the target in the same spot. You can be confident that your bow is properly tuned.

Q: What is the most important thing to remember when tuning a bow?

A: The most important thing to remember when tuning a bow is to be patient and take your time.

Final Thought

How To Bare Shaft Tune Your Bow. Bare shaft tuning is a great way to optimize your bow’s accuracy and performance. With practice and patience. You will be able to achieve consistent results with every shot. Remember, the goal is not accuracy but also consistency. Once your bow is properly tuned, you can enjoy shooting with greater confidence! Good luck and happy shooting!

Leave a Comment